Oce fx2081, User Manual

Page: 73 / 80

6.4 Printer trouble
Symptom What to confirm Suggested solutions
Alarm lamp illumi-
nates.
Is any error message
displayed on the LCD?
Confirm the displayed message and
fix it (see page 6-3 ).
Cannot print. Is the machine turned
on?
Turn the machine on by pressing the
[I] side of power switch.
Is the USB cable or
LAN cable connected
properly?
Check the cable connection.
Did you choose the cor-
rect printer port?
Check whether the printer port set-
ting is correct on your computer.
With a local printer, the printer port
should be USBxxx (xxx represents
port number).
With a network printer, the LPR
port with the same address as the
IP address set on this unit should be
selected.
If the wrong printer port has been
selected, change it to the correct one.
Is any error message
displayed on the LCD?
Confirm the displayed message and
fix the issue (see page 6-3 ).
Has the correct IP
address been set on
your machine? (only
when using network)
Confirm the correct IP address with
network administrator and set the
correct one.
The printer driver
may not be installed
properly.
Reinstall the printer driver.
Cannot print on
specified paper.
Setting on application
software is incorrect.
Check set paper size in application
software. Then confirm “Paper Size”
setting on set window for printer
driver. If both are not reflected on
actual printout, change those set-
tings.
Printing speed is
slow.
Computer may not
have enough memory.
Install more RAM in your computer.
The print job is large
or complex.
The machine takes a lot of times
when printing a large print job.
Please wait until the machine fin-
ishes the job.
6-4