Oce fx2081, User Manual

Page: 15 / 80

1-10
For Windows 2000 Professional users
IMPORTANT
Make sure that you followed installation steps 1 to 9 described on pages
1-3 through 1-4 .
10
Plug the USB cable to your machine and then connect it to your com-
puter.
Connect
NOTE
Be sure to use a shielded USB cable. Use of an unshielded cable
may result in radio interference.
11
Turn on your machine.
12
The “Found New Hardware Wizard” will appear. Click [Next].
13
Select “Search for a suitable driver for my device (recommended)” and
click [Next].
The “Locate Driver Files” dialog box appears.
14
Select “Specify a location” and clear any other choices, then click [Next].
15
Click [Browse] to specify the folder you have located in step 6 on page
1-3 . Then click [OK]. If you did not change the location, navigate to your
hard disk: “C:\Oce_fx2081\PCL”.
16
Click [Next].
NOTE
If the “Digital Signature Not Found” dialog box appear, click [Yes] to
install the driver.
17
Follow the instructions that appear on the window until you can click
[Finish].
18
The “Found New Hardware Wizard” appears again. Repeat the same
procedures from steps 13 to 17. This will complete the installation.
NOTE
If your machine has a device option(s), go to “Activating the device
option(s) on Windows 2000 Professional” on the next page.