Oce DFS10, Operator'S Manual

Page: 23 / 90

Getting to know the Océ DFS10 17
Book path through the Océ DFS10
The arrows in the illustration below show the movement of the copy sets along the DFS10
book path.
1. Manual Input Station In manual mode, the operator inserts the copy sheets into the
Manual Feeder. The Manual Feeder delivers each copy set to the
Manual Input Station.
2. Auto Input Station In automatic mode, the host machine feeds the copy sets into the
Interface Module of the DFS10. The Interface Module delivers
each copy set to the Auto Input Station.
3. Set Drive Station The Manual Input Station or Auto Input Station delivers the copy
set to the Set Drive Station where the copy set sheets are aligned.
4. Book Drive Station If a Cover Tray has been selected, the cover is delivered to the
Book Drive Station where the cover is held open. The Set Drive
Station feeds the copy set into the open cover in the Book Drive
Station.
5. Binder Module The Book Drive Station delivers the book to the Binder Module.
Heat melts the glue in the cover spine to fuse the copy set sheets
into the cover. Cooling fans then cool the book. After this process,
the book is delivered to the Vertical Transport.
6. Vertical Transport The Vertical Transport elevates the book to the Output Tray of the
DFS10.
7. Output Tray The Output Tray receives the bound books and stacks them until
the operator unloads them.