manualshive.com logo in svg

Oce DFS10, Operator'S Manual

Share
Download
Oce DFS10 Operator'S Manual Download Page 21

Getting to know the Océ DFS10

15

Cover Trays

The DFS10 has two Cover Trays located on the front right side. Each Cover Tray holds a 
cassette of specially designed Océ covers. When you select a Cover Tray from the Control 
Panel, the DFS10 uses the covers in the selected Cover Tray to bind the books.

The Cover Tray Labels indicate how to control access to the Cover Trays. The labels also 
indicate the cover supply levels. The Cover Trays will not close if a cassette is not loaded. 

Below is an illustration of the components of the Cover Tray Labels. Descriptions of each of 
the components follow the illustration.

1. Unlock Button

Press this button to unlock the Cover Tray. When a Cover Tray is
not in use or when the Cover Tray currently in use gets empty, the
DFS10 will unlock the Cover Tray.

2. In Use indicator (Red)

This indicator lights when the Cover Tray contains covers, the tray 
is currently selected, and the tray is locked and ready for 
operation.

3. Please Wait indicator (Amber)

This indicator lights after you press the Unlock button and the 
Cover Tray is in the process of unlocking. It also lights after you 
close the Cover Tray or select a tray and the tray is in the process 
of raising to the feed position.

4. Ready to Open indicator (Green)

This indicator lights after you press the Unlock button and the
unlock operation completes. The Cover Tray is then ready to be
opened. When the cassette in the Cover Tray currently in use
empties, this indicator lights automatically.

5. Cover Supply indicators

These indicators provide you with the approximate percentage of
covers in the cassette. The range is one light lit (cassette is nearly
empty) to six lights lit (cassette is full). Each light represents
approximately 25 covers.

Summary of Contents for DFS10



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands