Oce DFS10, Operator'S Manual

Page: 11 / 90

Introduction 5
Placing your Océ DFS10
For reliable DFS10 operation and book quality, Océ recommends the guidelines below.
• Place the DFS10 in a well-ventilated room.
• Ensure that the room temperature and relative humidity are within the following ranges:
– Temperature: 17° C (
63
° F) to 32° C (9
0°
F)
– Relative humidity: 15% to 85%
• Place the DFS10 on a flat, level surface. Ensure that the DFS10 is aligned to your Océ
copier/printer for optimum performance.
• Avoid locations that subject the DFS10 to the following conditions:
– Direct sunlight which may make the screen difficult to see
– Extreme changes in temperature or humidity
After selecting a location that meets the preceding guidelines, ensure that the DFS10 has
sufficient space around it for service, if required. The diagrams below illustrate the service
space requirements.
Service space requirements