Oce CS9360, User Manual

Page: 130 / 146

CS9360 User’s Guide
6-130
Step 4:
Press [Cleaning] for at least two seconds.

Start Head cleaning.

“Cleaning **%” is displayed.

After Head cleaning is complete, the operation panel shifts to Normal.
NOTE

If blurs or lacking parts in printed media do not disappear with one time of Head cleaning,
perform Strong cleaning.

If blurs or lacking parts in printed media do not disappear with several times of Head
cleaning, refer to “7 Troubleshooting”, and take appropriate measures.
6.2.4 Cleaning the cleaning wiper
(1) Time for cleaning
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
(2) Cleaning procedures
NOTE

Use the cleaning stick to clean the cleaning wiper.
For details of the cleaning stick, refer to “8.3 Options/Supply list”.
Step 1:
If the printer is switched ON, make sure the following.

Printing or other operations are not in progress.

The operation panel display is Normal.
Step 2:
Display the CR Maintenance menu.