Oce CS665 Pro, User Manual

Page: 436 / 495

CS665 Pro 12-53
Output applications 12
12.9 Using Finisher FS-607
The Finisher FS-607 has a primary (main) tray and a secondary (sub) tray, each of which has the following
output modes.
Output to the primary (main) tray
Combined with the output modes above except staple mode, you can also choose to output face up or face
down, and output front to back or back to front.
Example: make 3 copied sets from 4 original sheets
Mode Description
Non-sort Non-sort mode simply means that the offset-stacker finisher modes are not selected. Copies will
be stacked upon exit without being offset by sorted sets.
Collate Collate mode outputs multiple copies of the original set, having each sorted set offset by 30 mm
upon exit.
Uncollate Uncollate mode groups together multiple copies of each original and offsets the sets by 30 mm
upon exit.
Staple Staple mode offsets and staples each sorted set.
Non-sort Staple Collate Uncollate
1 oblique
staple
Offset by 30mm
Offset by 30mm
2 staples