Oce CS665 Pro, User Manual

Page: 408 / 495

CS665 Pro 12-25
Output applications 12
12.6 Using folder/finisher/stitcher functions manually
The following finishing functions are manually available with a set of paper loaded in the upper tray of the post
inserter of Folding unit FD-503.
- Folding unit FD-503 only:
Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate Fold, Half Fold, 2 Holes Punch, 4 Holes Punch
- Folding unit FD-503 + Finisher FS-521:
1 Stapling/ 2 Stapling in addition to the functions for folding unit only
- Folding unit FD-503 + Saddle stitcher SD-506:
Fold & Staple in addition to the functions for folding unit only
- Folding unit FD-503 + Finisher FS-521 + Saddle stitcher SD-506:
All functions are available.
!
Detail
For detailed specifications, see page 3-3 and page 7-6.
0 When using folder/finisher/stitcher functions manually, paper should be placed only in the upper tray of
the post inserter.
0 Multi-feed detection is a feature that automatically stops the machine if more than one sheet is fed at
a time. The post inserter is designed to detect multi-feeding. Coated paper and other kinds of smooth
surface paper may activate this function even if a single sheet is fed, stopping the machine. Should this
case occur frequently, press the Multi-Feed Detection button and light up the lower lamp, in order to
turn the function OFF.
Multi-Feed Detection
Function ON
Multi-Feed Detection
Function OFF
1 Stapling
2 Stapling
2 Holes Punch
4 Holes Punch
Z-Fold
Tri-
Fold-out
Tri-Fold-in
Double
Parallel
Half-Fold
Gate Fold
Multi-Feed Detection button
Staple Selection button
Start/Stop button
Fold Selection button
Punch selection
button
Fold & Staple