Oce CS665 Pro, User Manual

Page: 344 / 495

CS665 Pro 11-39
Application functions 11
11.13 Eliminating copy marks along borders: Frame center erase
When the original is scanned from the original glass, black copy marks may be produced along borders and
center line, and also around punch holes.
Use this function to eliminate them from the copies and lower the toner consumption at the same time.
0 Available range for the Frame erase amount is 1 to 300 mm, for the Center erase amount is 1 to 99 mm,
in 1 mm increments.
0 Frame erase and Center erase can be used in combination.
0 The Frame erase amount can be specified both collectively for all four sides and individually for each
side.
1
Position the original.
– Both ADF and original glass are available.
When lowering the ADF/original cover onto thick original (e.g. open book), do not press it down too
hard. Keep the ADF/original cover open, if required.
2
Touch [Application] on the Copy Screen.
3
Touch [Frame Center Erase] on the Application Screen.
Mode Description
Frame erase Erases black copy marks along borders of the original image.
Center erase Erases black copy marks along the center line of the original.