Oce CS 5070, User Manual

Page: 63 / 139

Printing options 63
Turning on the dryer
The dryer is installed at the base of the printer stand and is designed to dry the
ink. When activated, the dryer fans turn on at the beginning of a print and stay
on for 10 minutes unless you set a specific dry time.
▼ ▼ ▼ ▼
To turn on the dryer
1
Press
Setup/Ink Option/Dryer
.
2
Choose
On
.
3
Press
OK
.
Setting the dry time
Unattended prints require drying time to prevent the ink from smearing when
the image touches the take-up roll or previously printed images. Different
media can require different drying time depending on the ambient temperature
and humidity. Dry time values range from 10 seconds to 60 minutes. When this
time expires, the printer rolls or cuts the image before printing the next image
in the buffer.
▼ ▼ ▼ ▼
To set the dry time
1
Press
Setup/Ink Option/Dry Time
.
2
Choose a time from 10 seconds to 60 minutes.
3
Press
OK
.
Adjusting the LCD contrast
The LCD contrast option lets you adjust the brightness of the control panel
(with default setting 9). The contrast values range from 1-16, with 16 as the
least contrast.
▼
▼ ▼
▼
To set LCD contrast
1
Press
Setup/User Setup/LCD Contrast
.
2
Choose the contrast value.
3
Press
OK
.