Oce ColorWave 900, User Manual

Page: 289 / 320

Remote Service: configure the proxy
Procedure
1.
Open the [Support] - [Remote Service] tab, and click on [Configure proxy]
2.
Set up the "Proxy server":
• Automatic proxy detection: select this setting when you do not know all the proxy settings. You
can select this setting to let the system detect the proxy automatically.
• [Proxy enabled]: select this setting when you know the proxy settings and want to enable the
proxy yourself. You have to fill in [Proxy hostname] and [Proxy port].
• [Proxy hostname]: enter the fully qualified hostname of the proxy server.
• [Proxy port]: enter the port of the proxy.
3. Set up authentication:
• [Proxy requires authentication]: select this setting when authentication is required.
• [Proxy authentication: user]: enter the user name for authentication.
• [Proxy authentication: password]: enter the password for authentication.
• [Proxy authentication: domain]: enter the domain for authentication.
4. Click OK to finalize the proxy configuration.
Remote Service: configure the proxy
Chapter 11 - Support 289