Oce ColorWave 900, User Manual

Page: 114 / 320

Embedded fold templates
Introduction
In case you have a folding device configured as finishing device ([ Estefold 5011 ] or [ Estefold
5013 (with reinforcement unit)]) the list below gives an overview of common European fold
templates available in the folding device. Follow the
create a new template on page 117
procedure to map these embedded fold templates to the fold templates in Océ Express
WebTools.
IMPORTANT
The [Top of folded package when printing portrait] setting or the [Top of folded package when
printing landscape] setting defines the position of the legend when a sheet enters the folding
device. This is to make sure that after folding, the legend is on top of the folded package.
For example, when the [Top of folded package when printing portrait] is [Top right], the sheet
should enter the folding device as indicated below.
Sheet input Folded package output
[Name] Default Fold Template
[Description] Full fold template with default values
[Embedded template ID] 2
[Top of folded package when printing portrait] [Top right]
[Top of folded package when printing land-
scape] [Top left]
Embedded fold templates
114 Chapter 5 - Configure the print system