Oce ColorWave 650, User Manual

Page: 316 / 336

The basic workflow of 'Support' - 'Licenses' activation
Introduction
Before you can work with licenses, you must access the 'Support' - 'Licenses' tab in Océ
Express WebTools to activate the licenses. The following workflow describes the available
actions during the activation of a license file.
The license activation workflow
1.
View the current active licenses.
You can make a list of new options you need and make a list of license numbers. Océ
needs the list of new options and the license numbers to create a new license file.
2. Get the host ID of the Océ system.
Océ needs the host ID of your Océ system to create a new license file.
3.
Send the list of new options you need, the list of license numbers and the host ID to Océ.
Océ creates and delivers one or more new license files.
4.
Create a back-up of the current active licenses if necessary.
Save the current active licenses to do so.
5.
Activate the licenses.
The license activation job guides you through the following steps.
• 1. Locate the license file
• 2. Preview the new active licenses
• 3. Accept the end user license agreement
• 4. Finish the license activation job
• 5. Restart the Océ system.
Chapter 9 - License management 316
The basic workflow of 'Support' - 'Licenses' activation