manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 33

The components of the scanner (optional)

Introduction

The embedded scanner is an optional of the printer.

The components of the scanner (top cover closed)

5

1

2 3

4

Component

Description / Function

1

[top cover] 

Closes off the scanner.

2

[output refeed protector] 

Prevents that your output is refed into the scan-
ner.

3

[originals exit] 

Exit for the scanned original.

4

[original feeding table] 

Use the original feeding table to feed the original
into the scanner (face up).

5

[open levers] 

Use the open levers to open the top cover of the
scanner.

The components of the scanner (optional)

Chapter 2 - Get to Know the Printing System

33

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands