manualshive.com logo in svg

Oce ColorWave 500, Operation Manual

Share
Download
Oce ColorWave 500 Operation Manual Download Page 209

Copy Jobs

Do a default copy job 

Introduction

When you want to copy an original and you do not make any settings, the default presets are
used. You only use the Smart Access to submit your job.

You can see the presets that are used in the job settings section of your job.

Procedure

1.

Feed the original face up and centered on the original feeding table.
The copy tile with the copy Smart Access is automatically selected on the user panel.

2.

Select the number of copies and tap the green button.

NOTE

Tap on [Release the original] under the Smart Access to release your original from the
scanner.

Copy Jobs

Chapter 4 - Use the Printing System

209

Summary of Contents for ColorWave 500











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands