Oce Colorado 1640, Operation Manual

Page: 167 / 194

Enable the use of HTTPS
Introduction
You can enable the use of HTTPS to establish a secure communication between a browser and
the controller for the settings editor access.
To enable the use of HTTPS you have to install a valid identity certificate on the controller. In
order to do this you have to:
1. Make a certificate request on the controller
2. Receive a valid certificate from the certificate request
3. Upload the valid certificate on the controller
Procedure
1.
Open the settings editor.
2.
Click on [Configuration]
→
[Security].
3.
Click on [Edit] in the [Identity certificate] header.
4. Fill in the information for the certificate request:
1. Fill in the fully qualified domain name of the printer under [Common name].
2. It is advised to fill in the alternative names (e.g. hostname or IP address) to guarantee access
to the printer from any browser.
5.
Click on [Ok].
A new window opens.
6.
Click on [Create request file].
A line with [req.csr] appears under the button.
Enable the use of HTTPS
Chapter 7 - Configure the network and security settings 167