Oce BLM 500, User Manual

Page: 6 / 106

6 Chapter 1 Introduction to the Océ BLM500
Introduction
Introduction
Introduction
Thank you for choosing the Océ BLM500.
Your Manual
The Océ BLM500 User Manual describes how to do these tasks:
■
Operate the Océ BLM500
■
Find and correct error conditions
■
Do normal maintenance tasks
Operator training is given when the Océ BLM500 is installed. To make sure you use
your Océ BLM500 correctly, read your manual.
The Océ BLM500 User Manual does not describe the operation of the printer. If
needed, refer to your printer user manual.
Safety Information
Safety information is included in the separate 'Safety Information Manual'. Read the
safety information before you use your Océ BLM500.
Caution: A CAUTION message tells you that a procedure or operation can
be dangerous. To prevent injury, you must follow the instructions.
Attention:
An ATTENTION message tells you that a procedure or operation can
damage the machine or the product. To prevent damage, you must follow the
instructions.
Installation
Your Océ BLM500 must be installed by a service engineer. Special knowledge is
needed to install the machine.
Attention:
Only connect the machine to a mains power supply of the correct voltage with a good
earth-connection. The correct machine-voltage is shown on the label at the mains
power supply input on the rear of the machine. If the machine is connected to the
wrong supply, the warranty is canceled.