Oce Arizona 550 GT, User Manual

Page: 108 / 263

Roll Media Option Specifications
Introduction
The Roll Media Option available for the Océ Arizona 550 GT printer allows the use of
various flexible media that are supplied on a roll. Specifications such as the print area
available, supported media size and thickness, and the amount of waste associated with
the use of roll media are indicated in this section.
Note:
The Océ Arizona 550 GT and the Roll Media Option must be operated in accordance
with the environmental conditions specified in the Océ Arizona 550 GT Site Preparation
Guide and all safety requirements noted in this document.
Media Size Supported
Width (Max.): 2.2m (86.6")
Width (Min.): 0.9mm (36")
Roll Diameter (Max.): 240mm (9.45”)
Core Inner Diameter: 76.2mm (3”)
Print Size Supported
2.190m (86.2”)
This allows for a minimum 5mm (0.2”) border. This is necessary to ensure the platen is
not contaminated with ink due to possible media tracking errors. Cured and uncured ink
on the platen will have a serious effect on printer performance. Any spilled ink must be
removed immediately (See RMO Maintenance section). If an image exceeds the 5mm
border requirement, printing will not be allowed to proceed.
Maximum Media Thickness
This value is not officially specified. It is theoretically possible for the RMO system to
accommodate media up to 3mm (0.11 inches). However, most media at or near that
thickness will have problems in the transport mechanism of the RMO unit.
Maximum Supported Weight
#
Max. Weight kg (lbs) Media Width (mm)
28 (62) 900 ≤ x < 1220
40 (88) 1220 ≤ x < 1480
45 (100) 1480 ≤ x < 1780
50 (110) 1780 ≤ x ≤ 2200
Chapter 6 - How to Operate the Roll Media Option 108
Roll Media Option Specifications