Oce Arizona 400 Series GT, User Manual

Page: 46 / 270

Operator Interface Module Tabs
#
[46] Interface Tabs
Interface Modules
#
Function Component
Provides management of all aspects of working with print jobs.
It also controls some features of the printer and provides access
to Roll Media print controls (if that option is installed). Print Job Control
(Print tab)
Displays maintenance tasks you must perform and indicates
when to do them. After you perform each task, the printer will
record that and then calculate when the task must be performed
again. At that time you will be reminded that the particular
maintenance task is due. Periodic Mainte-
nance
Provides information about the amount of ink consumed, the
amount of media printed and the number of print jobs started.
Also provides counters for the UV lamp bulbs use. Printer Counters
(Counters Tab)
Displays information about, and also allows you to change
various aspects of the printer: Date and Time, Network Con-
nections, User Interface, Printer Settings, and Roll Media Set-
tings (if that option is installed). Printer Settings
(Settings tab)
This area is reserved for use by trained field service technicians
only. Service and Diag-
nostics
Provides access to the Shutdown, Job Manager, Special prints,
Ink Flush Procedure, Spit Catcher Alignment, and Log files. Tools and Utilities
(Tools and Utilities
tab)
Allows you to update the printer to the latest version of the
printer software and firmware. Software Upgrade
(Upgrade tab)
Chapter 4 - How to Navigate the User Interface 46
Printer Interface Software