Oce arizona 1240 GT, User Manual

Page: 143 / 212

White Ink QuickStart
Introduction
This section shows you how to print a simple job with a white flood fill. Océ Arizona Quality-
Layered print mode is used to print white ink applications such as under-printing for non-white
media, over-printing for backlit applications viewed 2
nd
surface or as middle layer for a day-night
application. The following section provides more detail about the various options available when
printing with white ink.
Purpose
This exercise will help you get familiar with some of the basic concepts involved when you print
images with white ink.
Before you begin
Obtain and import an ONYX media profile (media model) that is set to Quality-Layered print
mode.
NOTE
Sample Media profiles for white ink are available for download from the DGS website: https://
dgs.oce.com/.
How to Print a Simple Job Using White Ink
Procedure
1. Open an image of your choice with an ONYX media profile that uses Quality-Layered print mode.
2.
Take the printer offline in ONYX RIP-Queue so the job will not be automatically sent to the printer.
3.
Process/rip the job.
4.
Define one or two of the data layers as a white flood layer.
To define a white flood layer, modify the printer settings of a processed job in RIP Queue - right
click the job, edit printer settings, select Quality-Layered for the Printer Print mode, then select
Define Layers.
If you want to print first surface (e.g. opaque media) the bottom and middle layers can be
configured to be white flood layers and the top layer to be a CMYK data layer. If you want to print
White Ink QuickStart
Chapter 9 - How to Manage a White Ink Workflow 143
Océ Arizona 1200 Series