4
4-22
Performing Setup from the Control Panel
TCP/IP Setup with Token Ring
Enable TCP/IP for Token Ring, and enter the IP address and subnet mask. If your
TCP/IP network has a gateway and users outside the gateway plan to print to the
Océ 760C using TCP/IP, enter the gateway address.
Enable Auto IP Configuration
Yes/No [Yes]
Select Yes to allow the Océ 760C to obtain its Token Ring IP address. Depending on
your network and the protocol you select in the following option (DHCP or
BOOTP), the IP address can change. Select No to assign the Océ 760C a static IP
address that will not change. If you select No, proceed to the IP Address option, where
you manually set the IP address.
Network Setup
Protocol Setup
TCP/IP Setup
Token Ring Setup
Enable TCP/IP for Token Ring
Yes/No [Yes]
Select Yes if you have a TCP/IP network connected to the Océ 760C over Token
Ring.
If you use Token Ring, you must enable TCP/IP for Token Ring in order to enable
Fiery WebTools.
N
OTE
:
If you are using TCP/IP for printing from Windows computers, enabling
TCP/IP here also lets you use the Fiery utilities from Windows computers using
TCP/IP protocols.
