3
3-12
Preparing for Océ 760C Setup
About the Océ 760C default password
The Océ 760C is set with the Windows NT default password “Fiery.1” for security
reasons. This is in compliance with security policies stipulated by Microsoft
Corporation. To ensure network security in your environment, the administrator must
set a password.
Changing the Océ 760C system password
You can change the default password from a Windows 98/Me client computer. Follow
the procedure that follows.
If you have the Fiery Advanced Controller Interface, you can change the Océ 760C
administrator password in the same way you set the password for a Windows NT
workstation.
N
OTE
:
If you leave the password blank or specify a password that is too short, you are
prompted to set a new one.
T
O
CHANGE
THE
O
CÉ
760C
DEFAULT
PASSWORD
FROM
W
INDOWS
98/M
E
1.
Click Start in the Window 98/Me taskbar, choose Programs, and then choose MS-DOS
Prompt.
The MS-DOS Prompt window appears.
2.
At the command prompt, enter the new password as follows.
For example, if you want to change the password to “Fiery.2”:
>net password\\Océ 760CName Administrator Fiery.1 Fiery.2
N
OTE
:
“Océ 760CName” depends on your Océ 760C system settings.
3.
Press Enter.
The new password, “Fiery. 2”, is now set.
4.
At the command prompt, type Exit.
