Oce 760c Page 27 Configuration Manual Download

Page: 27 / 200

2-3

Océ 760C on a TCP/IP network with Windows NT 4.0/2000/XP

•

For Windows NT 4.0/2000/XP, install the appropriate printer driver files on the
Windows NT 4.0/2000 server.

For more information, see the

User Software Installation Guide

•

Repeat the installation for all users who print to the Océ 760C.

Each server and workstation running the Fiery utilities with TCP/IP also needs the
TCP/IP protocol and the Fiery utility software.

Configuring a Windows NT 4.0/2000 server to communicate with
the Océ 760C

To configure a Windows NT 4.0/2000 server to communicate with the Océ 760C,
follow these general steps. More detail is provided in subsequent sections in this
chapter and in your Microsoft documentation.

• Load the TCP/IP network protocol on the server and configure it with an

IP address, subnet mask, and gateway.

• Enter the host name of the Océ 760C in the host database used by your system (see

page 2-4

• Perform Océ 760C Setup.

• On the Windows NT 4.0/2000 server, create a printer for each Océ 760C print

connection, install the appropriate printer drivers, and (optionally) share the printer
on the network (see

page 2-5

• Enter the host name and remote printer name of the Océ 760C in the printer

connection. For more information, see

page 2-18

• If the Windows NT 4.0/2000 server is also a workstation, install Fiery utilities (see

the

User Software Installation Guide

Summary of Contents for 760c









































































































































































































Search results

Summary of Contents for 760c

Reviews:

Related manuals for 760c

Brands by name

Popular brands

Oce 760c, Configuration Manual

Search results

Summary of Contents for 760c

Reviews:

Related manuals for 760c

Brands by name

Popular brands