Oce 3121, Technical & Service Manual

Page: 824 / 908

12 TSM Océ 3121 SDS Description
Note: To reset, remove the originals from the original tray and then open the
RDF.
Overstacking alarm (Multi Tray-12)
Partial fault alarm (Multi Tray -12))
Code Nature Cause Operation Display Resetting
02H Overstacking
of paper The paper being
stacked during multi
tray operation has
exceeded the capacity
of a single bin. Stops upon
detection
overstacking Indicates a
message on
the copier’s
control panel Remove all
paper from the
bin
Code Nature Cause Operation Display Resetting
10H Partial fault An error occurred in
the bin unit feeding
motor M2, bin shift
motor M1, guide bar
swing motor M4 or
stapler swing motor
M5; the same type of
error has occurred
after turning off and
on the power Prohibits
delivery to the
sorter; how-
ever, permits
delivery to the
tray. No indication Remove all
the cause of
the error, turn
off and then
on the power.