Oce 1000C, Job Management Manual

Page: 80 / 206

3
3-22 Using Command WorkStation or Command WorkStation LE
Use Master print settings. To make use of all 100 available FreeForm Masters, the
operator must override the Create Master and Use Master print settings from
Command WorkStation or Command WorkStation LE.
N
OTE
:
For any new Create Master or Use Master setting to take effect, the job must be
reRIPped.
For background information on using the FreeForm feature, see the Printing Guide .
Creating and monitoring FreeForm masters
Users can assign FreeForm master numbers from 1 to 15 using the Create Master print
option when they send a job. These numbers can be changed to a master number from
1 to 100, with job overrides from the Job Properties dialog box.
When the first 15 FreeForm master numbers have been used, users may inadvertently
overwrite existing FreeForm masters by assigning what they think are new, unused
FreeForm master numbers. When users choose a master number from the Create
Master print option, an existing job using that master number is overwritten (the user
receives a warning message that they are about to replace an existing job).
For this reason, the Operator should delete existing master jobs or reassign master
numbers 1 through 15 to avoid any overwriting problems. Only the Operator can
assign numbers from 16 to 100, enabling a high level of control over the FreeForm
master numbers in use.
T
O CREATE A
F
REE
F
ORM MASTER
1. In the Active Jobs window, select the held job comprising the master elements of
the document.
2. Choose Properties from the Actions menu.
3. Scroll to FreeForm in the Job Properties dialog box.
4. For the Create Master print setting, specify the FreeForm master number you want to
assign to the job and click OK.
5. Choose Process and Hold from the Actions menu to assign the job a destination.