Oce 1000C, Job Management Manual

Page: 34 / 206

2
2-8 Introduction to Command WorkStation and Command WorkStation LE
Activity Monitor
The Activity Monitor displays a summary of the job activity on all Océ 1000C servers
or a selected Océ 1000C. The activity shown can include jobs released for spooling,
processing (RIPping), or printing. Held jobs do not appear in the Activity Monitor.
Display the Activity Monitor by choosing Activity Monitor from the Windows menu.
In Command WorkStation, you can use the server selection menu in the Active Jobs
window to display job activity for an individual Océ 1000C, or for all servers (see
page 2-12 ).
All Servers view*
In Command WorkStation, the All Servers view of the Activity Monitor summarizes
the activity on all connected Océ 1000C servers.
•
Server Name
—Each Océ 1000C appears in a Server Name bar. Click the bar to
expand or collapse activity information for a particular Océ 1000C.
•
Spooling, processing, and printing jobs
—When you expand the Server Name bar
for an Océ 1000C, any current job activity on that Océ 1000C appears next to a
corresponding status box (spooling, processing, or printing). If the Command
Workstation for the Océ 1000C is connected to more than one printer, the printer
handling the job is listed under the job name. When no activity occurs on the
Océ 1000C, the status boxes read Idle.
•
Error conditions
—When an error occurs, the Server Name bar for the affected
Océ 1000C appears highlighted in red. Details of the error appear under the
expanded bar.