background image

74

www.Observint.com

Split screens

Channel selection Video Playback Controls

Timeline

Time frame options

Search Type

Screen split number

Search Date

To search and play video in sub-periods:
1.  Configure the date and time you want to search.
2.  Select the split-screens you want the videos to be played in.
3.  Select the recording types you want to search, or check Search Type to choose all.
4.  Select the channel you want to search. 

Note

: This feature supports to search and playback of one channel at a time.

5.  Click the Play button to start playback. Control the playback with buttons on Video Playback Controls. Videos are being played 

in split-screens. When you left click on a particular split-screen, the time period of the video you clicked on will be displayed on 
the timeline. The color bar on top of the timeline indicates the time span of the video split-screen you have clicked. The color 
bar on the bottom of the timeline indicates the time span for the whole videos you have searched.

6.  Use the timeframe options to expand (for more detail) or compress the timeline. 

9.2  Smart Search and Playback

Click the 

Smart

 option at the top of the 

Search

 screen. Smart mode allows you to easily search and play the motion events in one 

or more specific areas of the channel.

SECTION 9: SEARCH, PLAYBACK, BACKUP AND TAGS

Summary of Contents for R16














































































































Reviews: