62
www.Observint.com
2. Click
Load Settings
on the Parameter Management menu.
3. Navigate to the Main Menu Settings file you want to load and select it.
4. Follow the on-screen instructions to complete the load operation. You must enter the
admin
user password to complete the
load operation.
5. Allow the operation to complete before continuing.
6. Remove the flash drive from the USB port and store it in a secure place for use later.
8.3.5 Auto Reboot
Use this menu to configure the recorder to automatically reboot on a schedule. This practice is recommended to maintain the
operational integrity of recorder.
To setup
Auto Reboot
:
1. Check the Auto Reboot select box to enable this feature.
2. Open the
Time
drop down list, and then select either Every Day, Every Week, or Every Month.
3. Depending on your selection, use the lower menus to define what day and time the reboot will occur.
4. Click
Apply
to save your settings. You can also click
Default
to setup a reboot every Sunday at 12:00 am.
8.4 Information
The Information menus show important configuration data about the recorder. Use it to show system information, channel
information, record information and network status.
SECTION 8: SYSTEM SETTINGS
