Observint R16 User Manual Download

Page: 60 / 109

www.Observint.com

—

Cursor Hidden Delay

: Open the drop down menu to select the time your DVR will hide the mouse cursor when idle.

Click

OFF

to disable this feature and temporarily disable password protection.

—

Cursor Acceleration

: To adjust the speed to move the mouse cursor.

—

Transparency

: Drag the slider left or right to change the transparent of the Menu Bar and the Main Menu.

5. Click

Apply

to save your settings.

SPOT OUT

Spot out has no configuration options.

8.2 Multi-User setup

This menu allows you to configure the user name, password and user permission.

The system supports the following account types:

—

ADMIN

: System Administrator, has full control of the system. Admins change both administrator and user passwords and

enable and disable password protection.

—

USER

: Normal User has access to Live, Search, Playback, and other functions. You can setup multiple user accounts with

different levels of access to the system.

Change Password

To change the password for the administrator or user accounts:
1. Click the

User Edit

icon. Password must be at least 8 characters and can contain a combination of numbers and letters.

SECTION 8: SYSTEM SETTINGS

Summary of Contents for R16














































































































Search results

Summary of Contents for R16

Reviews:

Related manuals for R16

Brands by name

Popular brands

Observint R16, User Manual

Search results

Summary of Contents for R16

Reviews:

Related manuals for R16

Brands by name

Popular brands