26
The recording schedule is valid only for one channel. If you want to use the same recording
schedule for other channels, use
Copy To
function.
Channel
: Select the channel to set its recording parameters.
PIR and Motion
: When the time slot is marked yellow, the channel records only when a motion is
detected during that time slot.
NOTE
:
To use the motion detection, you must enable and configure the motion settings for the
channel in the Alarm menu. See
No Record
: A timeslot marked black indicates that no recording scheduled setup for that timeslot.
5.3 Alarm
Use this menu to configure motion parameters. When motion is detected by one or more cameras,
the NVR will issue an alert by sending an email alert with an attached image from the camera to use
as a reference (if this option is enabled) and/or sending push notifications to the mobile app.
5.3.1 Motion
Click the
Alarm
button to configure the motion detection alarm feature:
Summary of Contents for HDV-SYSNB2WFL
Page 2: ...2...
Page 10: ...10 2 Click OK to send email The following message should appear...
Page 56: ...56...
