TD851W
150Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
If you want to enable the WDS, please go to the page WLAN->Basic, and select the "Mode" to be
AP+WDS.
Figure 4-23
¾
Enable WDS:
Select to enable WDS.
¾
Add WDS AP:
To add MAC addresses of other Access Point, follow the steps below.
Step 1. Enter MAC Address of the Access Point to communicate with in “MAC Address”
field.
Step 2. Give a description for that Access Point in “Comment” field.
Step 3. Click
Apply Changes
button to save the MAC address to “Current WDS AP List”.
)
Note:
If changes are made, after clicking
Apply Changes
button, a
Save
button will appear on the left
panel. You need to click the
Save
button to make your changes take effect.
4.3 Advanced
Choose “
Advanced
”, you can see the next submenus:
Click any of them, and you will be able to configure the corresponding function.
42
