Firmware Update Manual
PRO SERIES
FIRMWARE VERSION: 2.1.2
1.
Download the Firmware to your PC
2.
Unpack the content of the archive and copy it to the root folder of MicroSD-Card (recommended)
or internal Device storage
3.
Switch off PocketBook Pro by pressing button
On/Off
4.
Switch on PocketBook Pro by pressing
On/Off
5.
During boot press and hold both
Backward
and
Forward
buttons simultaneously until the message
Firmware update…
is displayed on the screen
6.
Follow the on-screen instructions
7.
Wait for the message on the screen:
Please connect power cable
, and then connect USB cable to
PocketBook Pro
Wait until you
Press central Key
… on the screen and press
OK
button
NOTE
You can check your current Firmware version in
Main menu > Configuration > About device
NOTE
If the firmware file is located in the Device’s root folder, it will have a higher priority in comparison with the file
stored on the SD card during the update process.
Troubleshooting
Error Message
Possible Reason
Correction Method
No upgrade image found
file SWUPDATE.BIN cannot be
found on the Micro SD card.
Make sure the file is in the root
folder of the card.
Try to format your Micro SD card
(make a backup copies of all its
content prior to formatting) and
copy the file to the root of the
empty card. If this error persists,
use another card.
Upgrade image is corrupted or
Image is empty
SWUPDATE.BIN file is damaged
or there is no space available on
the Micro SD card.
Delete some files from your
card and copy SWUPDATE.
BIN file on it one more time.
Repeat the download from www.
pocketbook-int.com. If this error
repeats, use other card.
File read error
Incorrect Micro SD card
Try to use another MicroSD card
Error. A different firmware version
is installed on the device
A firmware file of an older
version is stored in the device
internal memory.
Delete the old version of the
firmware file from the Device’s
internal memory root folder
