OBO Bettermann UDHOME 2 G, Mounting Instructions

Page: 43 / 187

43 |EN UDHOME 2 G
Applying the floor covering and adjusting the height
1. Close the hinged cover
1
, place the the footfall protection
plate on it and attach the mounting protection cover
8
.
Fig. 11: Lay the screed
2. Lay the screed flush to the top edge of the mounting protection
cover
8
and work it up to the floor socket.
6 Applying the floor covering and adjusting the
height
Risk of damage through joint mortar!
Contact between the floor socket with joint mortar leads to product
damage!
When applying joint mortar to the expansion joint along the floor
socket, the frame and cover must be protected against the joint
material.
Risk of damage from joint material/adhesive!
The ingress of the joint material/adhesive into the floor socket can
lead to product damage!
Thoroughly clean the interior after floor covering work.
ATTENTION
ATTENTION