O B M
Presentation Mode
If the presentation Mode is enabled, the engine activates a decode session every time it detects a
change in ambient illumination. The decode session continues until the barcode is decoded or the
decode session timeout occurs.
Driving the TRIG pin on the host interface connector low can also activate a decode session. The decode
session continues until the active trigger signal is no longer present or the barcode is decoded or the
decode session timeout occurs. The trigger signal needs to be negated before the engine is able to
monitor ambient illumination again.
Presentation Mode
Timeout between Decodes (Same Barcode)
Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given
period of time.
To enable/disable the Timeout between Decodes (Same Barcode), scan the appropriate barcode below.
Enable Timeout between Decodes:
Do not allow the engine to re-read same barcode before the
timeout between decodes (same barcode) occurs.
Disable Timeout between Decodes:
Allow the engine to re-read same barcode.
Disable Timeout between Decodes
Enable Timeout between Decodes
20