Objet Eden500V, User Manual

Page: 52 / 130

Using Objet Studio
5–18
DOC-00500 Rev. F
Figure 5-22: Tray and model displayed in shaded view
The other display options are wire frame and points .
To display the build tray in wire frame view:
¾
Select
View > WireFrame
or click the WireFrame icon .
Figure 5-23: Tray and model displayed in Wire frame view
To revert to the shaded view:
¾
Select View > Shaded or click the Shaded icon .
To display objects as boxes, showing their maximum dimensions
instead of the model geometry:
¾
Select
View > Display Bounding Box
.
Figure 5-24: Model displayed with bounding box
To display the area around objects needed for support material (to
produce a matte finish):
¾
Select View > Display Thickening Box .