DOC-00500 Rev. F
5–13
Eden500V/350V/350 User Guide
Figure 5-16:
Entity Properties
dialog box,
Transform
tab
You
can
make
precise
changes
to
an
object
on
the
build
tray
by
selecting
the
object
(either
on
the
tray
or
in
the
tray
hierarchy
pane)
and
changing
its
values
in
the
dialog
box.
Note:
You can only change the height of the objects on the build tray if this
is allowed by the Objet Studio settings (see “Object Position on the
Z-Axis” on page 11.)
The
properties
displayed
in
the
Transform
tab
of
the
Entity
Properties
dialog
box
are
absolute
values,
representing
the
actual
position
of
the
object
on
the
build
tray.
Another
way
of
repositioning
objects
on
the
tray
using
precise
values
is
by
applying
changes
to
object
properties
relative
to
the
current
position
.
There
are
two
Relative
Transform
dialog
boxes
available:
•
The
R.
Trans
tab
of
the
Entity
Properties
dialog
box.
Figure 5-17:
Entity Properties
dialog box,
R. Trans
tab
