Copyright 2010-2017 Obihai Technology, Inc.
51
said VLK. In order to switch to the next tab, a feature key must be assigned the function “Next Tab” such that pressing
that key advances to the next VLK tab or recycles to tab 1.
As a feature key, a VLK is different from the other keys in that it also has an associated window area on the screen
along the right edge next to the physical Line Key. This is called a
Virtual Line Key Window (VLKW)
. Only the VLKW of
the VLKs that are on the current VLK Page are visible. A VLKW provides additional feature key function dependent
information. For example, if the key is assigned the "call" function, its VLKW may show the call peer's name or number
during a call, with an icon or background color that reflects the call state.
Left Line Keys and Virtual Left Line Keys
Available on the OBi2000 Series Only.
There are additional 6 physical Left Line Keys (LLKs) on the left side of the screen on the OBi2182 (3 on the
OBi2062/2162), that are symmetrically positioned versus the 6 physical (Right) Line Keys. Like the (Right) Line Keys,
there are 4 tabs of Virtual Left Line Keys (VLLKs), thus providing additional 24 VLLKs (12 on the OBi2062/2162) on these
phones. The programming and functionality of the VLLKs are the same as the LLKs.
Programmable Keys
There are eight (8) Programmable Keys on the OBi1032/1062 and one (1) on the OBi1022. These are called PK1
–
PK8.
Programmable Hard Keys
There are no Programmable Keys in the OBi2000 series. Instead they have 9 additioanl Hard Keys that are wired to the
most commonly used features with function-specific icons printed on the physical keys . Theoretically, though not
recommended, one can re-program these additional Hard Keys to provide other functions in general, like the
Programmable Keys in OBi1000 series. The recommended and default functions of these 9 Hard Keys are:
1.
Phone Book
•
Default
Function
=
Action URL
•
Default
Number
=
phone://phone-book
The default setup of this key to access the local Phone Book (a built-in Phone App). You can map this key to
invoke instead the LADP directiory by setting
Number
=
phone://netdir?service=LDAP
Or the Network Directory configured under one of the SP
n
service by setting
Number
=
phone://netdir?service=SP
n
2.
Conference
•
Default
Function
=
Conference
The default setup of this key provides similar action the
conf
soft key would, if the highlighted call is in the
Connected or Holding state. After the user dials the new conferee target number, where the screen would
show the
conf.now
soft key, press this key triggers the same action of the
conf.now
soft key instead.
A valid alternative to this behavior is to change
Function
to
Add To Conference
when pressing the
key would add ALL calls currently in the holding state to a conference call.
3.
Transfer
•
Default
Function
=
Transfer