Copyright 2010-2017 Obihai Technology, Inc.
111
To make this function available on the phone, you must enable the option
SPn Service
–
Network Provided
Services
::
RemoteOffice
. There is no specialized app, feature key functions or soft key options to launch this function;
the user can only invoke this function by going through the Net Services App.
Simultaneous Ring
The user can view and change the following settings of this feature from the phone GUI:
•
Enable/Disable this fe
ature (by turning on/off the “Active” option)
•
Turn on/off the option “Do not ring my Simultaneous Ring Numbers if I’m already on a call”
•
Add a location
•
Remove a location (note: there is a limitation at present where the last location cannot be removed via XSI)
•
Change the Phone Number attribute of a location
•
Turn on/off the option “Answer confirmation required” for each location
To make this function available on the phone, you must enable the option
SPn Service
–
Network Provided
Services
::
SimultaneousRing
. There is no specialized app, feature key functions or soft key options to launch this
function; the user can only invoke this function by going through the Net Services App.
Call Forward Always
To make this function available on the phone, you must enable the option
SPn Service
–
Network Provided
Services
::
CallForwardAlways
. This feature is similar to the CallForwardUnconditional feature that is available
natively on the phone (per service). To use the version that is provided by the soft-switch, the administrator should
disable the corresponding service on the phone to avoid ambiguity.
In addition to going through the Net Services app, the following methods of access are available:
•
Feature Key: Define a feature key with the function Call Forward. Set the Service parameter of the key to the
SP service that provides this feature
•
Soft Key: The Call Forward soft key on the home screen of the phone can be mapped to the network provided
CallForwardAll service on a specific SP service, by setting the parameter
Phone Settings
–
User Preferences
Settings
::
CallForwardUnconditionalFeatureProvider
to equal to that SP service
•
User Preferences
–
Call Forward Setting: As a side effect of enabling the Soft Key option in the last item, the
Call Forward Setting under User Preferences app on the GUI is also pointing to the same network provided
CallForwardAlways feature
The user can enable/disable CallForwardAlways as well as setting a forwarding number; the settings are stored on the
server.
Call Forward Busy
To make this function available on the phone, you must enable the option
SPn Service
–
Network Provided
Services
::
CallForwardBusy
. This feature is similar to the CallForwardOnBusy feature that is available natively on the
phone (per service). To use the version that is provided by the soft-switch, the administrator should disable the
corresponding service on the phone to avoid ambiguity.
The only way of access from the phone is by going through the Net Services app. The phone allows the user to get and
set this feature on the server; the setting is stored on the server.
Call Forward No Answer
To make this function available on the phone, you must enable the option
SPn Service
–
Network Provided
Services
::
CallForwardNoAnswer
. This feature is similar to the CallForwardOnNoAnswer feature that is available
