6
GB
Installation
Installing the product
800361
Figure 1 – Page 2
– Measure the dimensions for the drill holes for fix-
ture.
– Mark the drill holes on the ceiling.
– Drill the holes and insert the dowels.
– Screw firmly to the wall/ceiling.
Figure 2 – Page 2
– Connect the power cable as shown.
Figure 3 – Page 2
– Mount the product as shown.
800362/800363/800364
Figure 5 – Page 3
– Measure the dimensions for the drill holes for fix-
ture.
– Mark the drill holes on the ceiling.
– Drill the holes and insert the dowels.
– Screw firmly to the wall/ceiling.
Figure 6 – Page 3
– Connect the power cable as shown.
Figure 7 – Page 3
– Mount the product as shown.
Inserting/changing the bulbs
800361
Figure 4 – Page 2
– Insert the bulb as shown.
– Change the bulb as shown.
800362/800363/800364
Figure 8 – Page 3
– Insert the bulb as shown.
– Change the bulb as shown.
Service
• Have your product repaired by a qualified speci-
alist only.
This will maintain the safety of your product.
Troubleshooting and help
If you are unable to eliminate the fault yourself, ple-
ase directly contact an store in your area. Please
remember that repairs carried out by non-professio-
nals will invalidate your warranty claim and may
cause additional costs.
Maintenance
• Before carrying out any work on the product,
ensure that the unit has no power.
• Check all screws regularly to ensure that they sit
tight. This will maintain the safety of your pro-
duct.
DANGER! Risk of burning!
Bulbs and the product itself will become
hot when in use.
– Do not touch
– Keep children away
– Before changing the bulb, allow to
cool.
DANGER! Danger of fire!
Do not cover
bulb and product. There is a risk of fire if
covered with flammable materials (for
example, a cloth)!
The specified minimum distance to radia-
ted surfaces or materials must be maintai-
ned. See the section on "Technical data"
for the minimum distance.
DANGER! Risk to life!
The electrical con-
nection may only be carried out by an
appropriately qualified professional.
Before installation, switch off the power to
the electrical network (switch off at the
main switch/fuse box).
DANGER! Danger of fire!
The specified
minimum distance to radiated surfaces or
materials must be maintained. See the
section on "Technical data" for the mini-
mum distance.
DANGER! Risk of burning!
Bulb beco-
mes hot when operated. Before changing
the bulb, allow to cool.
CAREFUL! Product damages!
Do not
touch the glass panel of the bulb with your
fingers. Fingerprints burn themselves into
the glass, become visible and shorten the
life time of the bulb.
DANGER! Risk to life!
Unprofessional
repairs may mean that your product will no
longer operate safely. This endangers you
and your environment.
800361_362_363_364_Spot.book Seite 6 Mittwoch, 4. Mai 2016 12:14 12
