Fitting and Removing the Wheels
Press
To fit the rear wheels, slide the wheel shaft into the hole on the frame, until they click
into place (fig.7).
To remove the rear wheels, press the lever on the inside of the wheel mount (fig.8) and
simply slide the wheel out (fig.9).
To fit the front wheels, simply slide each wheel shaft into the receivers on the front of the
frame (fig.10) until they click into place (fig.11).
To remove the front wheels, press the button on the top above each wheel (fig.12) and
pull away from the frame.
fig. 7
fig. 10
fig. 8
fig. 11
fig. 9
fig. 12
Unfolding and Folding your Pramette
To unfold your pramette, release the primary lock by pressing the button on the right
side of the frame. While keeping this button pressed, release the secondary lock by
lifting the lever (fig.1 & 2).
Lift the handle up away from the wheels (fig.3) until it clicks into place (fig.4).
To fold your pramette, release the primary lock by pressing the button on the right side
of the frame. While keeping this button pressed, release the secondary lock by lifting the
lever (fig.5). Lower the handle towards the wheels (fig.6).
The wheels can be removed if you wish (see page 5 for details).
fig. 1
fig. 4
fig. 2
fig. 5
fig. 3
fig. 6
1.Press
1.Press
2.Lift
2.Lift
Lift
Lower
“Click”
“Click”
Press
WARNING:
Ensure that all locking devices are engaged before use
4
5
www.obaby.co.uk
www.obaby.co.uk
Summary of Contents for Chase 4 Wheeler Pramette
Page 8: ......
