Oase ProMax Garden Automatic Switch, Manual

Page: 12 / 116

12
Installation and connection
NOTE
Excessive water pressure in the system will damage the unit.

Ensure that the distance from the highest water withdrawal point does not exceed 15 m.
 Ensure that the system pressure does not exceed 10 bar.
 Adhere to the maximum permissible pump pressure. It may be less than 10 bar.
 A
The unit can be connected horizontally or vertically at any point between the pressure connec-
tion of a garden pump, deep well pump or submersible pressure pump and the first water with-
drawal point (e.g. washing machine).
•
Recommendation: Fit directly to the pressure connection of the pump. Use an adapter.
How to proceed:
 B
1. Screw the adapter onto the pump.
–
Ensure that the O-ring is correctly seated.
2. Screw the unit onto the adapter.
–
When fitting, ensure that the arrow on the cover and the outlet of the unit point in the di-
rection of the water flow.
3. Connect the unit to the downstream line.
NOTE
Ensure that all connection lines are completely leak-tight, as leaking lines can impair the function
of the system and lead to damage.
 Use a suitable sealant to seal the threads of the lines and the connection to the pump.
 Overtightening of plastic screw connections can lead to damage. Do not apply excessive force.