Oase InScenio FM-Master, Commissioning

Page: 10 / 156

10
Safety information
Electrical connection
•
Only connect the unit if the electrical data of the unit and the power supply match.
•
Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated
fault current of max. 30 mA by means of a fault current protection device.
•
Protect open plugs and sockets from moisture.
Safe operation
•
Disconnect any connected units that could pose a danger from the InScenio FM-Master after
use to prevent them from being switched on accidentally. For example:
–
Units that can heat up.
–
Units with exposed moving parts that could cause injuries, such as electric knives or saws.
•
Do not use the unit, if electrical lines or the housing are damaged.
•
Never immerse the unit in water or other liquids.
•
Only use the unit with the protective hood fitted. This also protects the unit from the effects
of the weather.
•
Do not carry or pull the unit by its power cable.
•
Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
•
Do not use multi-outlet strips.
•
Should problems occur, please contact the authorised customer service or OASE.
Intended use
Only use the product described in this manual as follows:
•
Operation only as a power supply distributor for suitable OASE products.
•
Operation only at ambient temperatures of -20 °C … +45 °C.
•
While adhering to the technical specifications.
The following restrictions apply to the unit:
•
Do not use for commercial or industrial purposes.