- EN -
79
7.4.10 Resetting the network settings
The network settings are reset to the delivery default settings. Saved entries from the device library and the
timer are retained.
How to proceed:
J
1. Remove the plug.
2. Insert the service pin into the opening between the two top sockets until you feel a resistance. That is the
reset button.
3. Keep the reset button pressed for approx. 5 seconds.
– An acoustic warning signal will sound at short intervals, signalling the deletion of the network settings.
– The network settings have been reset when the green LED on the InScenio FM-Master EGC is lit.
– Network name (SSID) and password of the WIFI router are deleted.
– The WIFI password of the InScenio FM-Master EGC is set to the factory default setting.
– The device password is deleted.
– The InScenio FM-Master EGC starts in access point mode and can now be directly connected to the
smartphone/tablet.
4. Reinsert the plug.
7.4.11 Restoring the factory default settings
The delivery default settings of the InScenio FM-Master EGC are restored. All entered data will be lost.
How to proceed:
J
1. Remove the plug.
2. Insert the service pin into the opening between the two top sockets until you feel a resistance. That is the
reset button.
3. Hold down the service button for min. 15 seconds.
– After 5 seconds, an acoustic warning signal will sound at short intervals, signalling the deletion of the net-
work settings. After a further 10 seconds a continuous acoustic warning signal will sound. Then the LED
will flash and the factory default settings will start being restored.
– The factory default settings have been restored when the green LED is lit.
– The network name (SSID) and password of the WIFI router are deleted.
– The WIFI password of the InScenio FM-Master EGC is set to the factory default setting.
– The device password is deleted.
– The device list is deleted.
– The InScenio FM-Master EGC starts in access point mode and can now be directly connected to the
smartphone/tablet.
4. Reinsert the plug.
