10
Connecting the control system
The control unit OASE Eco Control (accessories) is required to operate the pump.
AMX0158
Alternatively, the pump can be integrated in an OASE Control network. For information on this
topic, visit www.atlantic-oase.com.
EGC0009
For further information refer to the manual for the accessories.
Connecting and disconnecting the OASE Control plug connection
PLX0004
NOTE
The unit will be destroyed if water penetrates the plug connector.
•
Connect the plug connector or place the protective cap on the plug connector.
–
Ensure that the rubber seal is clean and fits precisely. If the rubber seal is damaged, replace
it.
–
Secure the plug connector or protective cap with the two screws.