Oase AquaMax Eco Classic 12000 C, Operating Instructions Manual

Page: 27 / 248

- EN -
27
14 Technical data
14.1 Unit data
Description AquaMax Eco Classic
9000°C 12000°C 18000°C
Connection voltage V AC 220 … 240 220 … 240 220 … 240
Mains frequency Hz 50/60 50/60 50/60
Power consumption W 23 … 90 26 … 120 33 … 175
Pump protection type IP 68 IP 68 IP 68
Controller protection type IP 44 IP 44 IP 44
Connection Discharge port G1½ G2 G2
Inlet port G1½ G1½ G1½
Hose mm 25/32/38 25/32/38 25/32/38
Max. pump capacity l/h 8800 12000 17600
Max. pump head m 4.5 4.7 5.3
Filter supply surface area cm² 810 810 810
Max. particle size, coarse dirt par-
ticles
mm 8 8 8
Max. immersion depth m 4 4 4
Length of mains cable to controller m 2 2 2
Length of mains cable to pump m 10 10 10
Dimensions Length mm 280 280 280
Width mm 230 230 230
Height mm 140 140 140
Weight kg 4.4 5.0 5.35
14.2 Water values
Type Fresh water/Pond water
pH value 6.8 … 8.5
Hardness 8 … 15 DH
Free chlorine <0.3 mg/l
Chloride content <250 mg/l
Overall dry residue <50 mg/l
Temperature +4 … +35°C
15 Symbols on the unit
Dust tight. Watertight to a depth of 4 m.
Dust protected. Protected against water splashed from all directions. Do not immerse.
Remove the unit at temperatures below zero (centigrade).
Possible danger for persons with pacemakers.
Protect from direct sunlight.
Do not dispose of with household waste.
Read the instructions for use.