![background image](http://html2.mh-extra.com/html/oakley/sre330/sre330_builders-manual_3112724016.webp)
the stripboard to allow for the lowest LED to fit into the board and have the meter to sit centrally on
the panel. Again solder the LEDs only once the panel has been fitted and the LEDs are pushed into
their panel holes. Care must be taken to ensure that the board to board connector does not foul the
resistor, R39, just behind it.
Using stripboard to make the LED connections.
The stripboard's copper strips go vertically. Care must be taken to ensure that the lower edge of the stripboard is
properly filed down so no copper tracks can touch the SRE330 main board surface.