you will create a form of stereo phase panning, where each phaser moves in an opposite
direction to give a wide stereo effect.
The unit is designed to work with standard MOTM/Oakley signal levels, although it is possible
to modify your unit to be run straight from a guitar.
Power (+/-15V) is provided to the board either by our standard Oakley 4-way header or
Synthesizers.com header. Current draw is around 30mA. This unit will also run from a +/-12V
supply with a slight reduction in dynamic range.
The Oakley Equinoxe is also available in a small modular format as the Analogue Systems
RS400.
Here we can see the three pin header and two way jumper that selects the LFO mode. In the position
shown in the photograph the LFO OUT will produce an inverted signal - the jumper is aligned with the
letters INV on the circuit board.
5
