OAK Environmental Express PH250, Instruction Manual

Page: 29 / 62

Data capture and storage
17
■ Data
This section describes the basic method of data storing and transferring using OAKTON
PH200 series Handheld meters.
● Data capture and storage
In OAKTON 200 series Handheld meters, data measured by the instrument can be stored in
the internal memory.
To save the measured data;
• Press the ENT key to save the displayed data.
• Meter displays the saved data for 2 seconds and then the display returns to the previous
screen automatically.
• If the data storage limit reaches 500 in PH250 model or 1000 in PH260 model, memory full
error occurs and MEM FULL is displayed.
• In such case, print the data or transfer necessary data to a PC (only for PH260) and delete
the data from the internal memory of the instrument.
Viewing stored data
• To view stored data, press key.
• Use keys to review different stored records.
• Press key to return to measurement mode.
Note