O2 Xda Flame, Manual

Page: 41 / 218

3
Settings
3.1 Personal settings
Buttons
To customize the program hardware buttons to open your most frequently used programs:
. Tap Start > Settings > Personal tab > Buttons > Program Buttons tab.
. Under Select a Button , tap the button you want to assign to a program and then select a
program from Assign a Program .
In the Up/Down Control tab, Delay before First Repeat changes the time elapsed before
scrolling begins. Repeat Rate changes the time it takes to scroll from one item to the next.
Press and hold the Up/Down control to scroll through the items in a list.
In the Backlight tab, check the Light Sensor Enable box to set backlight time settings.
From the drop down lists, choose when to switch the backlight off when using AC Power and
Battery Power.
Input
. Tap Start > Settings > Personal tab > Input .
. On the Input Method tab, select a desired input method. On the Word Completion tab,
select the desired settings for word completion. On the Options tab, select the desired
options for writing and recording. These options apply to any program where you can
record or write.
You can also change input options by tapping the arrow and Options .
Menus
Only 7 programs are allowed in the Start menu. To add frequently used programs to the Start
menu:
. Tap Start > Settings > Personal tab > Menus .
. Select the desired programs, then tap OK .