O2 Xda Flame, Manual

Page: 198 / 218

14
T
roubleshooting
CSD
CSD stands for Circuit Switched Data,
which is a wireless service protocol used
for WAP. It allows you to have continuous
WAP connection at a transmission rate of
.Kbit/s. Charges are billed per minute of
connection time, not data base.
URL
Uniform Resource Locator or URL is an
address system used on the Internet. All
homepages have a unique address, allowing
browsers to distinguish one from an other.
APN
Access Point Name, a setting for GPRS.
ISP
Internet Service Provider.
14.2 Troubleshooting
Why can’t I turn on my device when I
press the power key?
Either you didn’t press the key long enough,
or the device has shut down because the
battery power level is too low to make calls.
Please recharge the battery.
How do I suspend the screen display or
wake up the device?
Press and hold the power key to turn off the
device. If the screen display is off, press the
power key to wake up your device.
Why does my device display
“INSUFFICIENT MEMORY” when I open a
file or a program?
The device memory is shared by both
storage and programs. You can free up
some memory by removing some of the
rarely used programs you installed or
removing rarely used files.
Why doesn’t the screen respond
accurately to my stylus taps?
Tap Start > Settings > System tab >
Screen > General tab. Select Align Screen
to align the screen.
Why does my O
2
Xda Flame launch wrong
programs or ignore my command when I
press a device key?
Tap Start > Settings > Personal tab >
Buttons and check whether the programs
assigned to each key is correct. You
can change these key assignments by
preference
.
My phone displays ‘Insert SIM’, what
does this mean?
Insert the SIM card before you can use the
device. If it is already installed, remove and